ARTS built-in documentation server

Workspace Method sensor_responseBeamSwitching

Description

Simulation of "beam switching".

The measurement procedure is based on taking the difference between
two spectra measured in different directions, and the calculation
set-up must treat exactly two observation directions.

The returned spectrum is y = w1*y + w2*y2, where y1 and w1 are the
spectrum and weight for the first direction, respectively (y2 and
(w2 defined correspondingly for the second direction).

Zenith and azimuth angles after beam switching are set to the
values of the second direction.

Authors: Patrick Eriksson

Synopsis

sensor_responseBeamSwitching(

sensor_response, sensor_response_f, sensor_response_pol, sensor_response_dlos, sensor_response_dlos_grid, sensor_response_f_grid, sensor_response_pol_grid, w1, w2 )

Variables

OUT+IN	sensor_response	(Sparse)	The matrix modelling the total sensor response.
OUT+IN	sensor_response_f	(Vector)	The frequencies associated with the output of sensor_response.
OUT+IN	sensor_response_pol	(ArrayOfIndex)	The polarisation states associated with the output of sensor_response.
OUT+IN	sensor_response_dlos	(Matrix)	The relative zenith and azimuth angles associated with the output of sensor_response.
OUT+IN	sensor_response_dlos_grid	(Matrix)	The zenith and azimuth angles associated with sensor_response.
IN	sensor_response_f_grid	(Vector)	The frequency grid associated with sensor_response.
IN	sensor_response_pol_grid	(ArrayOfIndex)	The "polarisation grid" associated with sensor_response.
GIN	w1	(Numeric, Default: -1)	Weight for values from first viewing direction.
GIN	w2	(Numeric, Default: 1)	Weight for values from second viewing direction.