ARTS built-in documentation server

Workspace Method f_gridFromSensorAMSUgeneric


Automatcially calculate f_grid to match the sensor. 
This function is based on 'f_gridFromSensorAMSU' 

The method calculates f_grid to match the instrument, as given by
the backend frequencies f_backend, and the backend channel
responses backend_channel_response.

You have to specify the desired spacing in the keyword *spacing*,
which has a default value of 100 MHz. (The actual value is 0.1e9,
since our unit is Hz.)
The produced grid will not have exactly the requested spacing, but
it will not be coarser than requested. The algorithm starts with the band
edges, then adds additional points until the spacing is at least as
fine as requested.

Authors: Oscar Isoz


f_gridFromSensorAMSUgeneric( f_grid, f_backend_multi, backend_channel_response_multi, spacing, verbosityVect )


OUTf_grid(Vector)The frequency grid for monochromatic pencil beam calculations.
INf_backend_multi(ArrayOfVector)As f_backend but describes an instrument with muliple mixer/receiver chains.
INbackend_channel_response_multi(ArrayOfArrayOfGriddedField1)As backend_channel_response but describes an instrument with muliple mixer/receiver chains.
GINspacing(Numeric, Default: .1e9)Desired grid spacing in Hz.
GINverbosityVect(Vector, Default: [])Bandwidth adjusted spacing